Membraanstikstofgeneratoren NM-GEN
The membrane nitrogen generators NM-GEN extract the available nitrogen from the compressed air. Membrane nitrogen generators use hollow fibre membrane technology to separate nitrogen from other components in compressed air. The membrane uses the principle of selective permeation to produce purity nitrogen. Each gas has a characteristic permeation rate, which is a function of its ability to diffuse through a membrane. Oxygen is a fast gas and is selectively diffused through the membrane wall, while nitrogen is allowed to travel along the inside of the fibre, thus creating a nitrogen-rich product stream. The oxygen-enriched gas, or permeate, is vented from the membrane separator at atmospheric pressure.Most of the slow gases and a very small amount of the fast gases continue to travel through the fibre until they reach the end of the membrane separator, where the product nitrogen gas is piped to the application.
Kenmerken
| werkdruk | 5 - 24 bar |
| operat. temp. bereik | 35 tot 55 °C |
| Dauwpunt (bij omgev. druk) | < -50 °C |
| N2 capaciteit | 0,8 tot 780 Nm3/h |
| N2 zuiverheid | tot 99,5 % |
• Set externe toevoerluchtfilters
• Elektrische verwarming
• Ondersteunend frame of kast
• Druk regelaar
• Interne leidingen
• Stikstof- en luchtstroomregeling
OPTIONELE UITRUSTING
• Stikstofversterker
• Stikstofcilindervulsysteem
Applicaties
• Inert maken van ontvlambare vloeistoffen
• Laser snijden
• Doorstroom en golfsolderen van PCB's
• UV-uitharding van coatings
• Voedselverwerking
Technische data
Prijsaanvraag
Cesta Dolomitskega odreda 10
1000 Ljubljana
Slovenia
- +386 (0)1 200 68 00
- #EM#696f646c446a6b626f68276a657f207c79#EM#