Water-cooled aftercooler ACW series

Water-cooled aftercooler ACW series has been designed to reduce compressed air temperature thus water vapour content in compressed air system. Hot compressed air/gas passes through the tubes. Cooling water passes around the tubes in counter flow. ACW aftercooler ensures the maximum performance and protection of all equipment, such refrigeration dryers, adsorption dryers and filters, positioned downstream of this unit.

ACW

Characteristics

operating pressure 10 bar
connections (Air)
connections (Water)		 DN100 to DN300
 DN32 to DN100
operating temperature range      
 1,5 to 200 °C
flow rate
 510 to 12550 Nm3/h
standard colour
 RAL 9005

Applications

• Automotive
• Electronics
• Food & Beverage
• Chemical
• Petrochemical
• Plastics
• Paint
• General industrial application

Technical data

SIZING CONDITIONS:
Compressed air flow at 7 bar(g) working pressure and 50 °C inlet temperature (100 % saturated).
Compressed air outlet temperature 10 °C higher than inlet cooling water temperature, 5 °C cooling water differential temperature.

CONDITIONS:
Shell side: max. pressure 10 bar and temperature range —10 °C/90 °C.
Tube side: max. pressure 10 bar and temperature range —10 °C/200 °C.

REMARKS:
Different models for different flow rates, also with higher max. preIssure and higher max. inlet temperature are available on request.
For each specific project-related case we recommend to check actual sizing and performance of aftercooler with Omega Air distributor/factory
water cooled aftercoolers technical data

Inquiry

I would like to send an inquiry and I accept the Privacy policy.


Omega Air d.o.o. Ljubljana
Cesta Dolomitskega odreda 10
1000 Ljubljana
Slovenia
+386 (0)1 200 68 00
#EM#696f646c446a6b626f68276a657f207c79#EM#