A-DRY BI / BM series
A-DRY BI / BM adsorption dryers have been designed for drying and purification of compressed air for breathing air applications. Version BI is suitable for industrial applications according to EN12021, while BM can be used for medical applications where the European Pharmacopoeia is applicable. The operation of the dryer requires two columns operated alternately. Adsorption takes place under pressure in the first column, while the second column regenerates with a portion of already dried compressed air at ambient pressure. Dryers consist of an upper and lower control block, a controller with an LED display and two columns filled with desiccant. The third column is filled with a combination of special functional materials which reduce the concentration of certain substances to an acceptable level. Springs in the columns make sure that the desiccant beads will not move during operation. A proven robust design enables efficient and reliable operation, fast installation and simple maintenance.
Characteristics
| operating presure | 4 to 16 bar |
| operating temp. range | 1,5 to 50 °C |
| pressure dew points | -40 °C (-25 °C / -70 °C) |
| flow rate | 6 to 200 Nm3/h |
| standard colour | RAL 9003 |
| average compressed air consumption | 15 to 21,6% |
Applications
- Drying and purification of compressed air for breathing air applications.
- Version BI is suitable for industrial applications according to EN12021.
- Version BM can be used for medical applications where European Pharmacopoeia is applicable.
Technical data
Inquiry
Cesta Dolomitskega odreda 10
1000 Ljubljana
Slovenia
- +386 (0)1 200 68 00
- #EM#696f646c446a6b626f68276a657f207c79#EM#