CS /CS SS series - Welded condensate separators

CS condensate separators are designed for high efficient removal of bulk liquids and large impurities from compressed air systems. The insert inside the housing creates controlled rotation of the air flow. Centrifugal flow of liquids (water, oil) and large particles is forced to the housing wall, slowed down and accumulated at the bottom of separator housing as condensate. The turbulent free zone in the lower part of the cyclone housing prevents condensate from being picked up and “carried over” into the airstream. To discharge condensate from the CS cyclone separator it is essential to install automatic or electronic condensate drain. CS cyclone separators are also available in stainless steel version CS-SS.

cs welded condensate separators

Characteristics

 operating pressure CS
 operating pressure CS SS
 16 bar
 13 bar
 volume flow rate 840 to 14280 Nm³/h
 connections DN65 to DN300
 operating temp. range 1,5 to 65°C
 standard colour CS RAL 9005
 material CS series carbon steel
 material CS SS series stainless steel 1.4404


Applications

• automotive
• electronics
• food and beverage
• chemical
• petrochemical
• plastics
• paint
• general industrial applications

Technical data

cs ss technical data

Gallery

Inquiry

I would like to send an inquiry and I accept the Privacy policy.


Omega Air d.o.o. Ljubljana
Cesta Dolomitskega odreda 10
1000 Ljubljana
Slovenia
+386 (0)1 200 68 00
#EM#696f646c446a6b626f68276a657f207c79#EM#